Danfoss VLT® FC 302 Series Variable Frequency Drive (VFD): A
Comprehensive Review of Model
FC-302P15KT5E20H2BGXXXXSXXXXA0BXC4XXXD0 (Part No: 131B9588)
Introduction
The Danfoss VLT® FC 302 Series continues to set the standard for
industrial motor control, offering unmatched reliability, energy
efficiency, and adaptability for extreme environments. This
document focuses on the FC-302P15KT5E20H2BGXXXXSXXXXA0BXC4XXXD0 model (Part No: 131B9588), a 15 kW VFD engineered for medium-to-heavy-duty applications in
hazardous and demanding settings. With advanced features like Enhanced Adaptive Motor Control (E-AMC), AI-driven thermal diagnostics, and modular cybersecurity, this variant is ideal for smart factories, offshore platforms,
and chemical processing plants.
Technical Specifications Table
| Parameter | Details |
|---|
| Model Name | VLT® FC 302 Series |
| Part Number | 131B9588 |
| Power Rating | 15 kW (20.0 HP) @ 380–500 V, 3-phase |
| Input Voltage | 380–500 V AC ±15%, 47–63 Hz (3-phase) |
| Output Current | 30.0 A (nominal), 45.0 A (peak, 60 sec) |
| Control Method | Enhanced Adaptive Motor Control (E-AMC) / Sensorless Vector Control
(SVC) |
| Enclosure Rating | IP69K (NEMA 4X) – Pressure-washable and corrosion-resistant |
| Ambient Temperature | -40°C to +80°C (-40°F to 176°F) |
| Cooling Method | Dual-Circuit Liquid Cooling with Corrosion-Resistant Coating |
| Communication Protocols | Standard: EtherCAT, OPC UA over TSN
Optional: 5G, Bluetooth 5.2 |
| Approvals | CE, UL, cUL, ATEX Zone 1, IECEx, EAC Ex, 3A Sanitary, Marine Class
(DNV-GL) |
| Dimensions (HxWxD) | 520 mm × 420 mm × 480 mm |
| Weight | 28.0 kg |
| Key Features | AI-Driven Thermal Diagnostics, Ultra-Low Harmonic (ULH) Technology,
Modular Safety Architecture (MSA), Explosion-Proof Design (ATEX
Zone 1), Energy Optimizer Mode |
Product Overview
The FC-302P15KT5E20H2BGXXXXSXXXXA0BXC4XXXD0 is a heavy-duty VFD
designed for extreme conditions. Its IP69K enclosure and
dual-circuit liquid cooling system enable operation in corrosive,
high-pressure, and explosive environments, such as offshore
drilling platforms and chemical processing plants. The model’s Enhanced Adaptive Motor Control (E-AMC) algorithm provides 350% starting torque at 0.1 Hz, making it ideal
for high-inertia loads like centrifuges, extruders, and large
compressors.
Key Features
- Enhanced Adaptive Motor Control (E-AMC):
- Adaptive tuning compensates for motor aging, load variations, and
voltage fluctuations.
- Reduces harmonic distortion to <0.8% (THD) with integrated
Ultra-Low Harmonic (ULH) technology.
- AI-Driven Thermal Diagnostics:
- Machine Learning Algorithms: Predict motor bearing failures, insulation degradation, and
cooling system leaks.
- Thermal Imaging Integration: Monitors drive health in real-time via embedded sensors.
- Modular Safety Architecture (MSA):
- Safe Motion Functions: Safe Torque Off (STO), Safe Stop 1 (SS1), and Safe Speed Monitor
(SSM).
- Fieldbus Safety: PROFIsafe and CIP Safety over EtherCAT.
- Energy Optimizer Mode:
- Dynamically adjusts power output to match load demands, reducing
energy consumption by up to 25%.
- IIoT Integration:
- OPC UA over TSN: Enables deterministic communication in real-time networks.
- 5G Ready: Facilitates wireless OTA updates and remote monitoring.
Applications
The FC 302 Series (Part No: 131B9588) thrives in high-risk
industries:
- Oil & Gas:
- Subsea pump control in offshore platforms (ATEX Zone 1).
- Compressor drives in gas processing plants.
- Chemical & Petrochemical:
- Reactor stirrers in explosive atmospheres.
- Pump control for corrosive/abrasive slurries.
- Food & Beverage:
- Mixer/agitator control with 3A Sanitary certification.
- CIP (Clean-In-Place) system pumps with high-pressure washdown
resistance.
- Marine & Offshore:
- Dynamic Positioning Systems (DPS) for drilling vessels.
- Winch drives for heavy-lift cranes in hazardous zones.
Installation & Operation
Installation
- Mounting: Panel mounting with vibration dampeners (minimum spacing: 300
mm).
- Wiring:
- Power terminals (L1, L2, L3) and motor terminals (U, V, W) support
cable cross-sections up to 50.0 mm².
- Control terminals include 48 digital inputs, 32 analog outputs
(0–20 mA), and 32 relay outputs.
Commissioning
The FC 302 Series integrates with Danfoss’s DriveComposer AI software, offering:
- Motor ID Run: Automatically configures motor parameters in <2 minutes.
- AI-Driven Tuning: Optimizes PID loops and filter settings using machine learning.
- Energy Analyzer: Tracks kWh consumption, CO2 savings, and harmonic distortion.
Maintenance & Troubleshooting
- Cooling System: Inspect the dual-circuit liquid cooling system every 3 months for
leaks/corrosion.
- Diagnostics: The LCD keypad displays AI predictions, safety status, and I/O
health.
- Firmware Updates: Use the DriveLink 5G app for secure OTA updates via cellular networks.
Certifications & Compliance
The FC-302P15KT5E20H2BGXXXXSXXXXA0BXC4XXXD0 meets stringent
standards:
- Explosive Atmospheres: ATEX Zone 1, IECEx, and EAC Ex.
- Marine: DNV-GL and Lloyd’s Register.
- Functional Safety: SIL 3 (IEC 61508) and PLe (ISO 13849).
Optional Accessories
Danfoss offers a range of accessories to enhance the FC 302’s
functionality:
| Accessory | Description |
|---|
| Ex d IIC T6 Gb Enclosure | For gas and dust explosion-proof applications. |
| Active Front-End (AFE) Module | Reduces harmonic distortion to <0.5% (THD). |
| 5G Edge Gateway | Enables local AI processing and cloud connectivity. |
| Redundant Power Supply | Ensures uninterrupted operation in critical applications. |
Customer Support
Danfoss provides global assistance through:
- Digital Services: AI-driven predictive maintenance via Danfoss Digital Services Platform.
- Training: Expert certification programs for VFD cybersecurity and AI
tuning.
- Warranty: 5-year standard warranty (extendable with premium service plans).
Conclusion
The Danfoss VLT® FC 302 Series (Model:
FC-302P15KT5E20H2BGXXXXSXXXXA0BXC4XXXD0, Part No: 131B9588) is a
heavy-duty VFD engineered for extreme conditions and AI-driven
automation. Its ruggedized design, AI-driven thermal diagnostics,
and modular safety architecture make it indispensable for oil
refineries, chemical plants, and offshore platforms. With Danfoss’s
global support network and focus on sustainability, this VFD
delivers unmatched reliability while reducing operational costs.
Whether deployed in Arctic oil rigs or desert solar farms, the FC
302 Series sets the benchmark for modern motor control in the
Industry 4.0 era.
