Allen Bradley MPL-B430P-MJ72AA is an MP series low inertia servo
motor. As part of the MP series, this motor features a high output
brushless design and is specifically designed to reduce motor size
while increasing output torque.
The rated speed of MPL-B430P-MJ72AA is 5000 RPM and the output
power is 2.2 kW. Its rotor inertia is 0.00038 kilograms per square
meter or 0.0033 pounds per inch- S2. It has a sustained stall
torque of 6.55 Nm or 58 pound inches.; The peak stall torque is
19.8 Newton meters or 175 pound inches.; Continuous stall current
of 9.2 amperes (0 peak) and peak stall current of 32.0 amperes (0
peak). This servo motor belongs to the 400 V class and is specially
designed for a rated power supply voltage of 460VAC. This is a
frame 4 motor with a magnet stack length of 76.2 millimeters or 3.0
inches. And equipped with a circular (SpeedTec) DIN connector,
which can rotate 180 ° at right angles. For position feedback, the
servo motor uses a multi turn high-resolution encoder and is
equipped with a shaft key without a shaft seal. The shaft seal kit
suitable for MPL-B430P-MJ72AA is MPL-SSN-A4B4. When installing the
optional shaft seal, the motor reaches IP 66 rating, and dust
prevention, strong water spraying, and room temperature water are
prevented from entering the equipment. If there is no shaft seal,
according to the direction of the motor, the motor's rating is
IP53, IP 51, and IP 50.
The working temperature requirement for this servo motor is 0-40 °
C or 32-104 ° F, while the storage temperature is 30-70 ° C or
-22-158 ° F. In addition, the motor must be stored in a non
corrosive environment.
The working temperature range of MPL-B430P-MJ72AA servo motor is 32
to 104 degrees Fahrenheit or 0 to 40 degrees Celsius. The
environmental rating of MPL-B430P-MJ72AA is IP66, with waterproof
and dustproof functions, optional shaft key extension, relative
humidity range of 5-95%, and no condensation. This powerful motor
has a speed of 5000 revolutions per minute and is equipped with a
SpeedTEC DIN connector that can rotate at a right angle of 180
degrees. This low inertia motor has a rated AC voltage of 460 volts
and an output power of 2.2 kilowatts. The Allen Bradley
MPL-B430P-MJ72AA low inertia motor can also operate under constant
shaft load. The maximum rated radial load for the axial load force
of the motor is 15 kilograms (42 pounds), and the zero radial load
is 25 kilograms (55 pounds). The rated value of radial load force
is 49 kilograms (109 pounds). The Allen Bradley servo motor
provides continuous and peak stall torque capability. The peak
stall torque of this high dynamic servo motor is 19.8 Nm (175
pounds per inch), and the continuous stall torque is 6.55 Nm (58
pounds per inch). The rated value of continuous stall current is
9.2 amperes (0 peak), and the rated value of peak stall current is
32 amperes (0 peak). Other specifications of the motor include a
stack length of 30 (76.2 millimeters or 3.0 inches), a frame size
of 4, and free mounting holes (F-type). It doesn't have brakes. In
addition, Allen Bradley MPL-B430P-MJ72AA servo motors are commonly
used in the Ultra3000, Kinetix 7000, Kinetix 2000, and Kinetix 6000
servo drive series.
| Armature Voltage | 460 V |
|---|
| Brake Option | No Brake |
|---|
| Connectors | SpeedTEC DIN Connector, Right Angle, 180° Rotatable (Quick Connect) |
|---|
| Magnet Stack Length | 30 = 76.2 mm (3.0 in.) |
|---|
| Product Type | Servo Motor |
|---|
